60x15 Q&A

Question 1

Telefunken output transformer 5 watt using EL84 tube, prim 5K ohm with grid tap 40%, output 8 ohm. Recommend? View answer

Asked 1 ´year ago | Hammond 1750B - Output Transformer - 5.48K, 8 OHM, SE, 10W

Question 2

can i use this for an off and on switch on a 5G9 Tremolux View answer

Asked 3 ´years ago | Alpha - Solid Shaft A1M Pot (with SPST switch)

Question 3

Will these fit an American Standard strat? View answer

Asked 1 ´year ago | String Saver Originals - Strat & Tele Saddles 2 1/16" String Spacing (set of 6)

Question 4

I have a Telecaster........what do I need to know if they will fit? View answer

Asked 3 ´years ago | Hipshot Grip-Lock Tuners - Fender® Directrofit™ (choose options)

Question 5

Matching screws for Penn Elcom gold corner View answer

Asked 3 ´years ago | Corner - 2-Leg Notched Gold

Question 6

What is the terminal spacing from one side of the board to the other of the inner lugs? View answer

Asked 2 ´years ago | Turret Strip - U-Style, 16 Lugs, Two Rows

Question 7

Are these direct replacements for Grovers? View answer

Asked 7 ´months ago | TonePros GKH330 Tuners - 3+3 Nickel

Question 8

Is this considered a short threaded shaft? View answer

Asked 1 ´year ago | Switchcraft #2T11 - 1/4" Mono Jack (Dual Contact)

Question 9

Does this fit an Epiphone Les Paul? View answer

Asked 2 ´years ago | Pickguard Support Bracket - For Les Paul - Nickel

Question 10

Can this switch be used to turn neck pick up on in a Strat while 5 way in bridge and bridge-middle position? View answer

Asked 1 ´year ago | Toggle Switch - SPST Long Arm

Question 11

Nut order inquiry View answer

Asked 3 ´years ago | Graph Tech PQ-1200-00 - TUSQ Slotted Bass Nut

Question 12

Is this pot a suitable replacement push-pull pot for a 1980 Fender Princeton Reverb amp? View answer

Asked 2 ´years ago | CTS Push-Pull - A1M Solid Shaft Pot (aluminum shaft)

Question 13

Would this bulb be the correct replacement for a dead bulb in a vintage Traynor YBA-1 tube amp? View answer

Asked 4 ´months ago | Dial Lamp - #44, T-3-¼, 6.3V, .25A, Bayonet Base (Pkg 10)

Question 14

Are these loaded with turrets View answer

Asked 3 ´years ago | Tagboard - Pre-loaded (56 Tags) 300mm x 56mm x 2mm

Question 15

Any recommended way to attach the spoke wheel to the truss as it is it just slips off View answer

Asked 1 ´year ago | Spoke Wheel Truss Rod - 465mm

Question 16

Could this be used to connect as single expression pedal to 3 different Boss pedals with TRS connectors? View answer

Asked 7 ´months ago | Switch - Rotary, 3 Poles, 3 Position

Question 17

Hi. Regarding bone classical saddle compensated: I don’t understand the dimensions. I get the 80 mm. But what are View answer

Asked 3 ´years ago | Bone Saddle - Compensated Classical Saddle

Question 18

will this bone nut fit my epiphone es 339 View answer

Asked 2 ´years ago | Bone Nut - Epiphone Style (slotted)

Question 19

Are theses tuners left and right, or universal? View answer

Asked 1 ´month ago | Schaller Deluxe Kluson-Style 3+3 Tuners

Question 20

Switchcraft Slide Switch On-On - White View answer

Asked 1 ´year ago | Switchcraft Slide Switch On-On - White

Question 21

Hammond 125DSC transformer View answer

Asked 3 ´years ago | Hammond 125ESE - Output Transformer - Universal, SE, 15W, 80mA

Question 22

Is this compatible with the JCM 900 combo amp? View answer

Asked 2 ´years ago | Footswitch Box - for Marshall, Two Button, LED

Question 23

Do these tuners have a threaded hex nut system, to drop into a 10mm hole without conversion bushings or mods? View answer

Asked 6 ´months ago | Schaller Deluxe Kluson-Style 3+3 Tuners

Question 24

Hi good morning View answer

Asked 1 ´year ago | Graph Tech PQL-5000-00 - TUSQ XL Slotted Fender Nut

Question 25

Is this will work for volume/tone, with a toggle 3 way switch for spliting a humbucker ? ( single humbucker guitar) View answer

Asked 2 ´years ago | CTS - A500K/A500K Stacked Concentric Pot

Question 26

I would like to replace the Standby switch on my blackface Super Reverb. It needs to switch 500VDC View answer

Asked 1 ´year ago | Switch - Carling, Toggle, SPST, Short Arm

Question 27

Would i need 2 of these to do a top & bottom bind on a larger LP style body? View answer

Asked 3 ´years ago | Binding - .040" White

Question 28

What is TUSQ really? View answer

Asked 4 ´years ago | Graph Tech PQ-1425-00 - TUSQ 5-string Slotted Bass Nut

Question 29

What hole size does this part fit into. The one in my Fender Super Champ XD is about 20 mm x 26 mm. Thanks. View answer

Asked 2 ´years ago | IEC C14 Jack

Question 30

Bar tip colour View answer

Asked 3 ´years ago | Hipshot - 6 String US Contour Tremolo Bridge (choose options)

Question 31

Hammond 1750c Output Transformer for Jensen P8R 4 Ohm Speaker. View answer

Asked 3 ´years ago | Hammond 1750C - Output Transformer - 7K, 3.2 OHM, SE, 5W

Question 32

Fitment for 1970 Telecaster View answer

Asked 3 ´years ago | Hipshot Grip-Lock Tuners - 6-inline Vintage (for 11/32" holes; choose options)

Question 33

what type og glue do i use to glue this tweed down View answer

Asked 3 ´years ago | Tweed Fabric - Olive - By Yard (64" Wide)

Question 34

Are you selling them individually or in a set View answer

Asked 1 ´year ago | Hipshot Tuner Buttons (choose options)

Question 35

Spring for Yamaha bridge View answer

Asked 2 ´years ago | Saddle Intonation Springs - 3/8"

Question 36

Do you know if these 8.5mm size fit an Epiphone inspired by Gibson j45 ? View answer

Asked 3 ´years ago | Hipshot Grip-Lock Tuners - 3+3 Vintage (for 11/32" holes; choose options)

Question 37

What size are the feet? View answer

Asked 3 ´years ago | Rubber Feet - Dunlop, for Crybaby Wah (with screws)

Question 38

does this have the same mounting holes as the hipshot? View answer

Asked 3 ´years ago | Non-Tremolo Bridge - Chrome

Question 39

Will this work in a vintage blackface amp for the bright switch? View answer

Asked 9 ´months ago | Switchcraft Slide Switch On-On - Black

Question 40

Does each position click into position, or is it more of a smooth blend between each? View answer

Asked 3 ´years ago | Switch - Rotary, 3 Poles, 3 Position

Question 41

How far apart are the holes? View answer

Asked 2 ´years ago | Handle Mount Spike - For Slotted Strap Handles

Question 42

What's the length of the Capacitor and lead? View answer

Asked 3 ´months ago | Capacitor - Polypropylene, Axial 630V (choose value)

Question 43

tuner side key????? View answer

Asked 3 ´years ago | Hipshot Grip-Lock Tuners - Fender® Directrofit™ (choose options)

Question 44

The reverb tank can fit on nomad 100 combo View answer

Asked 9 ´months ago | Reverb Tank - MOD 9AB2C1B

Question 45

Martin Nut View answer

Asked 3 ´years ago | Bone Nut - Martin Style (blank)

Question 46

Does the backing plate also come with the black tuners? View answer

Asked 3 ´years ago | Hipshot Grip-Lock Tuners - 6-inline Vintage (for 11/32" holes; choose options)

Question 47

Can you please confirm the size and shape of the post as well as the taper of this potentiometer. Thank you. View answer

Asked 11 ´months ago | Wah Pot - 100K

Question 48

hi really need your help do would these fir a kluson revolution tuning key thks i dont want to order and resend View answer

Asked 2 ´years ago | Hipshot Tuner Buttons (choose options)

Question 49

Height to the top side of the notch in the roller? Distance between roller notches centre to centre? Thanks. View answer

Asked 1 ´year ago | Roller String Guides (pair)

Question 50

do you have a strain relief to match this diameter of cable? View answer

Asked 11 ´months ago | Power Cord - 16AWG Bare End 3 Conductor (8 feet)

60x15 Q&A

Activity timeframe

Browse by Category

Browse by Category

Tools