60x15 Q&A

Question 1

Do these have an indentation? View answer

Answer posted 1 day ago | CTS - A500K No-Load Tone Pot

Question 2

which end is positive View answer

Answer posted 2 days ago | Capacitor - Polypropylene, Radial 630V (choose value)

Question 3

Would this cable work to build TS cables? View answer

Answer updated 2 days ago | Hookup Wire - 22AWG 600V Stranded, Topcoat - 50' Roll (Choose Colour)

Question 4

Do you know what size saddle an ll16 by Yamaha take View answer

Answer posted 7 days ago | Bone Saddle - Compensated Acoustic Saddle

Question 5

Will this bridge fit a 2023 Gibson SG special? View answer

Answer posted 10 days ago | TonePros AVT2G - US-spec Wraparound Bridge - Nickel

Question 6

are these pots good for tone and volume? View answer

Answer posted 13 days ago | Bourns - A500K Solid Shaft Pot

Question 7

Do these come with the mounting bolt/nuts ? (Not just the tension bolt) View answer

Answer posted 13 days ago | Capacitor Clamp - 1 3/8" Diameter

Question 8

Hi, I'd like to order 1 NG-GBPT-2268-CH-T and 1 NG-GBPT-2268-CH-B, when the bass side version will be in stock ? View answer

Answer posted 14 days ago | K-Style Tuners 6L - Bean Chrome (set) CLEARANCE

Question 9

CE-S-H205 Is fuse holder cap threaded or is it spring loaded push/twist/lock style? View answer

Answer posted 22 days ago | Fuse Holder - Generic 3AG Type

Question 10

Hi, Will this clamp fit a jj 40/20/20/20 multi sectional electrolytic cap can? View answer

Answer posted 22 days ago | Capacitor Clamp - 1 3/8" Diameter

Question 11

Pure tone barrel jack View answer

Answer updated 1 month ago | Pure Tone PTT5 - 1/4" Stereo Barrel Jack (nickel)

Question 12

My Fender volume knob keeps getting bumped - could I replace it with this roller knob as a low profile solution? View answer

Answer posted 1 month ago | Black Roller Knob Set - For 6mm (pkg 2)

Question 13

Hi good morning View answer

Answer posted 1 month ago | Graph Tech PQL-5000-00 - TUSQ XL Slotted Fender Nut

Question 14

Can I use the Hipshot GB7 to replace the low E Schaller tuner on my Larrivee acoustic bass? View answer

Answer updated 2 months ago | Hipshot GB7 - Bass Xtender (choose options)

Question 15

Do you need a different size set for 9-42 strings? View answer

Answer posted 2 months ago | Uo-Chikyu Hiroshima - Nut Slotting File Set (8 pcs)

Question 16

Left handed Graph Tec tuners. View answer

Answer posted 3 months ago | Graph Tech Ratio Locking Tuners - 6-inline Classic (choose options)

Question 17

SKU:AP-EP-4968-000 Can you tell me the full dimensions of these lug washers? View answer

Answer posted 3 months ago | Solder Lug Washers for Pots

Question 18

Just wondering if the 5/16 is the right size for Boss Pedals (example: CS-2), Thanks! View answer

Answer posted 3 months ago | Grommet - Rubber, for chassis holes - Choose Size (pkg 5)

Question 19

I would like to replace the Standby switch on my blackface Super Reverb. It needs to switch 500VDC View answer

Answer posted 3 months ago | Switch - Carling, Toggle, SPST, Short Arm

Question 20

aguilar fit? View answer

Answer posted 3 months ago | Concentric Knob - Fine Chrome

Question 21

Will these work with Graphtech tuners? View answer

Answer posted 3 months ago | Hipshot Tuner Buttons (choose options)

Question 22

what is the body size of these? View answer

Answer posted 3 months ago | Alpha - Short Solid Shaft Pot (choose resistance)

Question 23

Hardware? View answer

Answer posted 3 months ago | TonePros GKH330 Tuners - 3+3 Nickel

Question 24

Chassis strap screws View answer

Answer updated 4 months ago | Chassis Strap Screws - #8-32x3.25", Phillips, Oval, Stainless

Question 25

Can this choke replace aHammond 155H choke, which is rated as 5H 50ma? View answer

Answer posted 4 months ago | Hammond 194A - Choke - 4H, 50mA

Question 26

Just like some reviewers I can’t solder these. What was the ultimate resolution for the reviewers? View answer

Answer updated 4 months ago | Turrets - Chrome (pkg 10)

Question 27

Are you selling them individually or in a set View answer

Answer posted 4 months ago | Hipshot Tuner Buttons (choose options)

Question 28

I have a mesa boogie f30 with stock reverb tank. would this reverb tank be an improvement? View answer

Answer posted 4 months ago | Reverb Tank - MOD 4BB2A1B

Question 29

Does this come with insulation washers? View answer

Answer posted 4 months ago | Switchcraft #3501FR - RCA Panel Mount

Question 30

Sire v3 compatibility View answer

Answer posted 4 months ago | Hipshot USA Ultralite Bass Tuner - 1/2" (individual; choose options)

Question 31

Will these fit an American Standard strat? View answer

Answer updated 5 months ago | String Saver Originals - Strat & Tele Saddles 2 1/16" String Spacing (set of 6)

Question 32

What is the diameter of the wheel? View answer

Answer posted 5 months ago | Spoke Wheel Truss Rod - 615mm

Question 33

Are these the dish backed variety? View answer

Answer posted 5 months ago | CTS - A300K Vintage-style Split Shaft Pot

Question 34

Will these fit a 2000 Korean (Saein Factory) Epiphone Les Paul standard guitar without any modifications ? View answer

Answer updated 5 months ago | Schaller Deluxe Kluson-Style 3+3 Tuners

Question 35

Does the rocker switch have 4 electrical terminals on back of switch. I need replacement for Marshal JCM2000 DSL 50 View answer

Answer posted 5 months ago | Switch - Marshall, Rocker, Power for MG Amps, Black

Question 36

Any recommended way to attach the spoke wheel to the truss as it is it just slips off View answer

Answer posted 5 months ago | Spoke Wheel Truss Rod - 465mm

Question 37

Are these a drop in replacement for a Jackson JS32T king V? View answer

Answer posted 5 months ago | Hipshot Grip-Lock Tuners - 6-inline (for 10mm; choose options)

Question 38

Can you dye this black View answer

Answer posted 5 months ago | Vulcanized Fiberboard - 3" x 15" x 0.062"

Question 39

Can you guys post a wiring diagram or schematic for this style of push pull. I can't find it anywhere View answer

Answer posted 5 months ago | CTS Push-Pull - A1M Solid Shaft Pot (aluminum shaft)

Question 40

Hi, Do you have a picture of these installed? View answer

Answer posted 5 months ago | Rubber Ring For EL34/5881 and 6L6GC Tuber Retainers

Question 41

What style are the cans? flat or dish backed? resistance is 10% or 20% tolerance? View answer

Answer updated 6 months ago | CTS - 30A250K SOLID Shaft Pot (250K J Taper)

Question 42

Is the jacket size SJT ? View answer

Answer posted 6 months ago | Power Cord - 16AWG Bare End 3 Conductor (8 feet)

Question 43

Tuneamatic for Fernandes Monterey View answer

Answer updated 6 months ago | TonePros NVR2P - Nashville-style Tune-o-matic Bridge - Chrome

Question 44

the title says 465mm but the description says 445mm (end to end) - which of the two measurements is it? View answer

Answer posted 6 months ago | Spoke Wheel Truss Rod - 465mm

Question 45

Do these tuners come with bushing adapters or must they be purchased separately? View answer

Answer posted 6 months ago | Hipshot HB7 Bass Tuner - Individual (choose options)

Question 46

I have a cable connection to an amp jack at the body ( bass end on my martin). I would like to put Schaller strap View answer

Answer posted 6 months ago | Schaller Style Strap Locks - Gold (pair)

Question 47

Mod 4BB2A1B View answer

Answer posted 6 months ago | Reverb Tank - MOD 4BB2A1B

Question 48

Is this a suitable substitute for a 9BB2A1B in a Mesa Sigle Rectifier Rectoverb 50 (version 2, no tube driver) ? View answer

Answer posted 6 months ago | Reverb Tank - MOD 4BB2A1B

Question 49

Is this a good replacement Volume control for a BF Fender? View answer

Answer posted 6 months ago | CTS - 30A1M SOLID Shaft Pot (1M J Taper)

Question 50

Switchcraft Slide Switch On-On - White View answer

Answer posted 6 months ago | Switchcraft Slide Switch On-On - White

60x15 Q&A

Activity timeframe

Browse by Category

Browse by Category

Tools