CLEARANCE Q&A

Question 1

Will this work for a 7 string pickup View answer

Asked 2 ´years ago | Bar Magnet - AlNiCo 8 CLEARANCE

Question 2

B250k or similar dimmer View answer

Asked 2 ´years ago | Alpha - B250K Split Shaft Pot (M8-0.75) CLEARANCE

Question 3

Push-on push-off pot. minimum travel length ? View answer

Asked 3 ´years ago | Push-Push - A250K Split Shaft Pot CLEARANCE

Question 4

Will the part listed below work on Gibson basses? View answer

Asked 1 ´year ago | Truss Rod Nuts for Gibson® (pkg 4) CLEARANCE

Question 5

Would this work for making 10' guitar patch chords? I'm accustomed to George L's, but prefer soldered cables. View answer

Asked 3 ´years ago | RapcoHorizon Mini Guitar Cable - (9ft piece) CLEARANCE

Question 6

Would this fit a seymour duncan 59 bridge pickup? View answer

Asked 1 ´year ago | Humbucker Pickup Cover - 52mm Gold CLEARANCE

Question 7

re: baseplate for gibson 490r/490t? View answer

Asked 3 ´years ago | Pickup Baseplate - For Humbucker 52mm (nickel/silver) CLEARANCE

Question 8

Do these have a copper plating under the nickel plating? View answer

Asked 2 ´years ago | Humbucker Pickup Cover - 49.2mm Nickel CLEARANCE

Question 9

joe.resendes View answer

Asked 1 ´year ago | Bar Magnet - AlNiCo 4 CLEARANCE

Question 10

B7 View answer

Asked 2 ´years ago | Bigsby B7 Vibrato Tailpiece - Aluminum CLEARANCE

Question 11

I believe the bottom edge on this part is chamfered, rather than cambered. Peace. View answer

Asked 2 ´years ago | Humbucker Slug - Nickel (chamfered) CLEARANCE

Question 12

What is the thickness and is it made of steel or brass? View answer

Asked 1 ´year ago | Telecaster Bridge Vintage 3-Barrel - Chrome CLEARANCE

Question 13

Would the color of the gold match the gold finish Gibson uses on their hardware? View answer

Asked 2 ´years ago | Humbucker Pickup Cover - 52mm Gold CLEARANCE

Question 14

Can you ship 3X 50mm? View answer

Asked 2 ´years ago | Strat Pickup Cover Set - 52/50/50mm (choose colour) CLEARANCE

Question 15

how is bobbin holder affixed to winding machine ( 2 sided tape??) View answer

Asked 2 ´years ago | Schatten Design - Self-centering Bobbin Holder For Coil Winding CLEARANCE

Question 16

Are these pickup rings brass metal that are chrome covered? View answer

Asked 2 ´years ago | Telecaster Pickup Ring - Metal Chrome CLEARANCE

Question 17

Hey are these still made in the USA? View answer

Asked 3 ´years ago | Bigsby B7 Vibrato Tailpiece - Aluminum CLEARANCE

Question 18

What is the item weight? View answer

Asked 2 ´years ago | Classic Bass Bridge 4-string - Chrome CLEARANCE

Question 19

The smallest size View answer

Asked 2 ´years ago | Tee Nuts - #8-32 Steel CLEARANCE

Question 20

would that fit a Gibson SG Tribute? View answer

Asked 3 ´years ago | Towner US Standard Tailpiece Mounting Studs - Nickel (pair) CLEARANCE

Question 21

What screws do i want for mounting? View answer

Asked 1 ´year ago | Flatwork Set - Tele 50mm (top and bottom) CLEARANCE

Question 22

Is it for 1/2" or 3/8" hole? View answer

Asked 1 ´year ago | Bass Tuners - Standard E Black CLEARANCE

Question 23

What is the width from screw hole to screw hole on the bottom plate? View answer

Asked 3 ´years ago | Flatwork Set - Strat 50mm (top and bottom) CLEARANCE

Question 24

what size are the magnet holes for the 52mm black humbucker bobbin? View answer

Asked 3 ´years ago | Humbucker Bobbin - 52mm Black (slug side) CLEARANCE

Question 25

Why are these tailpieces on clearance? View answer

Asked 1 ´year ago | Bigsby B7 Vibrato Tailpiece - Aluminum CLEARANCE

Question 26

what are the use of this bar ? View answer

Asked 1 ´year ago | 10 Hole Keeper Bar - 49.2mm CLEARANCE

Question 27

I need some plastic 1/2 " black spacers for a 2001 Ford Ranger. View answer

Asked 1 ´year ago | Humbucker Pickup Spacer - Plastic CLEARANCE

Question 28

What is the specific positioning for the holes for the strings? View answer

Asked 5 ´months ago | Classic Fixed Bridge 6-string - Chrome CLEARANCE

Question 29

How do you magnetize them? View answer

Asked 1 ´year ago | Rod Magnets - AlNiCo 2 Bevelled (choose size) CLEARANCE

Question 30

Does this fit the American pro ii fenders? View answer

Asked 2 ´years ago | Curved Neck Plate - Black CLEARANCE

Question 31

Will these tuner drop into a 2022 Revstar View answer

Asked 1 ´year ago | Gotoh SGS510Z-MGT-S5 Locking Tuners - 3+3 Cosmo Black CLEARANCE

Question 32

Will this fit a Squier without needing to drill more holes or is it fender spec hole spacing? View answer

Asked 2 ´years ago | Classic Bass Bridge 5-string - Chrome CLEARANCE

Question 33

What is the post length of these tuners? View answer

Asked 2 ´years ago | Gotoh SGS510Z-MGT-S5 Locking Tuners - 3+3 Cosmo Black CLEARANCE

Question 34

What is the peak Gauss reading from one of these magnets? View answer

Asked 2 ´years ago | Bar Magnet - Ceramic 8 CLEARANCE

Question 35

WILL THESE FIT A SQUIER BRONCO BASS View answer

Asked 1 ´year ago | Bass Tuners - Standard E Chrome CLEARANCE

Question 36

What size hole is needed to drill though the head to install these? View answer

Asked 2 ´years ago | Bass Tuners - Standard E Chrome CLEARANCE

Question 37

What is the height of the string seat ( or saddle)? View answer

Asked 2 ´years ago | Classic Fixed Bridge 6-string - Black CLEARANCE

Question 38

Will these fit on a gibson 490R and 498T set? Any modification needed? View answer

Asked 2 ´years ago | Pickup Baseplate - For Humbucker 50mm (nickel/silver) CLEARANCE

Question 39

What is the carbon content of these screws? 1010, 1016, 1022, etc? View answer

Asked 2 ´years ago | Humbucker Pole Piece Screws - #5-40x3/4", Slotted, Fillister, Nickel

Question 40

What materials are the base plate and saddles made from? View answer

Asked 2 ´years ago | Classic Fixed Bridge 6-string - Chrome CLEARANCE

Question 41

Are these bobbins flat and true? View answer

Asked 2 ´years ago | Humbucker Bobbin - 52mm Black (slug side) CLEARANCE

Question 42

Are these rods made with left hand / right hand threads or coarse thread / fine thread arrangement? View answer

Asked 1 ´year ago | Low Pro Truss Rod - 610mm Blue CLEARANCE

Question 43

what's the thickness of the tolex? is it felt lined on the back? View answer

Asked 10 ´months ago | Tolex - Basketweave/Panama Red - By Yard (54" Wide) CLEARANCE

Question 44

Humbucker Pickup Cover - Open (in raw nickel) View answer

Asked 6 ´months ago | Humbucker Pickup Cover - Open Gold CLEARANCE

Question 45

Hi, can I use 2 of these to make a jig to magnetize pickups? Thx View answer

Asked 2 ´years ago | Bar Magnet - Neodymium CLEARANCE

Question 46

What are the dimensions View answer

Asked 2 ´years ago | Strat Blade Bobbin - Black CLEARANCE

Question 47

Restock? View answer

Asked 2 ´years ago | Bass Tuners - Standard E Gold CLEARANCE

Question 48

Standard bass tuners - will they fit a Gretsch electromatic g2220 junior jet bass? View answer

Asked 4 ´years ago | Bass Tuners - Standard O Chrome CLEARANCE

Question 49

Can the nut be replaced by a spoke wheel? View answer

Asked 2 ´years ago | Low Pro Truss Rod - 610mm Blue CLEARANCE

Question 50

Is the paint black? View answer

Asked 4 ´years ago | MG Chemicals - Super Shield Paint (12mL) CLEARANCE

CLEARANCE Q&A

Activity timeframe

Browse by Category

Browse by Category

Tools