Question 1

Is this will work for volume/tone, with a toggle 3 way switch for spliting a humbucker ? ( single humbucker guitar) View answer

Asked 9 ´months ago | CTS - A500K/A500K Stacked Concentric Pot

Question 2

What is the Centre to Centre distance between the mounting screws? View answer

Asked 9 ´months ago | 9V Battery Box - Vertical Mount (screw-in)

Question 3

What is the thickness and is it made of steel or brass? View answer

Asked 9 ´months ago | Telecaster Bridge Vintage 3-Barrel - Chrome CLEARANCE

Question 4

Would this replace a defective switch in a Fender Princeton Amp Reverb/Tremolo pedal? View answer

Asked 9 ´months ago | Footswitch - SPST Soft On-(Off) NC Momentary (solder)

Question 5

Is it actually 7mm, or is it 6.34mm / (1/4")? View answer

Asked 9 ´months ago | Plastic Binding - 1.5mm Black

Question 6

What is the terminal spacing from one side of the board to the other of the inner lugs? View answer

Asked 9 ´months ago | Turret Strip - U-Style, 16 Lugs, Two Rows

Question 7

is there a (white or black) backing, or is it a (swirled) celluloid/ cellulose-nitrate through and through? View answer

Asked 9 ´months ago | Pickguard Blank - 4-ply Modern Tortoise (11.5" x 17")

Question 8

What is the gear ratio on these? View answer

Asked 9 ´months ago | Bass Tuners - Classic Chrome

Question 9

Are these a step up in terms of material quality from the tuners that come on the current Squier basses? View answer

Asked 9 ´months ago | Bass Tuners - Classic Chrome

Question 10

re CE-P-H262...What it the total length? Are they made of real leather? Thanks. View answer

Asked 9 ´months ago | Vintage Style Handle - Tweed Style Brown

Question 11

Can this be used to mount telecaster bobbin to baseplate as well? View answer

Asked 9 ´months ago | Tuner Screws - #2x3/8”, Phillips, Round, Nickel

Question 12

Will these work with your telecaster flat work? View answer

Asked 9 ´months ago | Eyelets - Brass (pkg 10)

Question 13

IS THE BASE PLATE REGULAR THICKNESS AND MADE OF STEEL View answer

Asked 9 ´months ago | Gotoh BS-TC1 - In-Tune Telecaster Bridge (brass saddles; choose finish)

Question 14

Spring for Yamaha bridge View answer

Asked 9 ´months ago | Saddle Intonation Springs - 3/8"

Question 15

Hipshot Universal Mouting Plate View answer

Asked 9 ´months ago | Hipshot Grip-Lock Tuners - 6-inline (for 10mm; choose options)

Question 16

How thick is this ring? View answer

Asked 9 ´months ago | Humbucker Mounting Ring - Flat/Slanted Medium - Black

Question 17

Can it replace the varitone switch on an Epiphone Jack Casady? Thanks View answer

Asked 9 ´months ago | Switch - Rotary, 3 Poles, 3 Position

Question 18

What does the set weigh? View answer

Asked 9 ´months ago | TonePros GKH330 Tuners - 3+3 Nickel

Question 19

Would these fit in a Squier Classic Vibe 50's Telecaster? They also use vintage style tuners View answer

Asked 9 ´months ago | Gotoh SD91-MG-05M Top-Locking Tuners - 6-inline Nickel

Question 20

Fender bass ? View answer

Asked 9 ´months ago | Barrel Jack - 1/4" Stereo Chrome

Question 21

Is this a good fit for a Gretsch G5620T? View answer

Asked 9 ´months ago | Gotoh GE103B - ABR-style Tune-o-matic Bridge (choose finish)

Question 22

Does this pot require a little effort to turn it? I don't want a pot that turns too easy. View answer

Asked 9 ´months ago | Alpha - A500K Split Shaft Pot (M8-0.75)

Question 23

Does this pot require a little effort to turn it? I don't want a pot that turns too easy. View answer

Asked 9 ´months ago | Alpha - B500K Split Shaft Pot (M8-0.75)

Question 24

A follow up question from the previous one. View answer

Asked 10 ´months ago | Generic 125B - Standard+ Pedal Enclosure (1590N1)

Question 25

Is this Enclosure deep enough to fit Cliff S4 Jacks mounted on the top (largest surface)? View answer

Asked 10 ´months ago | Generic 125B - Standard+ Pedal Enclosure (1590N1)

Question 26

Trebble bleed question View answer

Asked 10 ´months ago | Treble Bleed Circuit - For Humbuckers

Question 27

Hi I am looking for bridge pins for a Warwick (electro-acoustic) Alien Rockbass. Will these fit? 17/26" looks cor. View answer

Asked 10 ´months ago | Plastic Acoustic Bass Bridge Pin - Black

Question 28

Are these pultruded or laid up. LMI is no longer a source and I used their stiffeners in my necks for decades. View answer

Asked 10 ´months ago | Carbon Fiber Neck Rod - 24" x 1/8" x 3/8"

Question 29

Is it always available ? Vintage 30 8 ohms ? View answer

Asked 10 ´months ago | Celestion Vintage 30 - 60W 8ohm

Question 30

le cable est-il blindé View answer

Asked 10 ´months ago | Shielded RCA Cable - Stereo Right Angle (3 feet)

Question 31

Would these be a straight drop-in replacement for a PRS Silver Sky SE? View answer

Asked 10 ´months ago | Gotoh SD90-MGT-SL Locking Tuners - 3+3 Nickel

Question 32

Does this function the same way as a blend? Is there a detent in the centre position? View answer

Asked 10 ´months ago | Alpha - Dual Gang Solid Shaft Pot

Question 33

what is an angled neck pocket..... most of my bridges (Hertiage 575 and Epi Joe pass) i believe are straight View answer

Asked 10 ´months ago | Gotoh GE103B - ABR-style Tune-o-matic Bridge (choose finish)

Question 34

Would this fit a Charvel DC2? View answer

Asked 10 ´months ago | Gotoh GE101Z - Zinc Tailpiece (choose finish)

Question 35

will this fit a 6.26mm pot shaft? View answer

Asked 10 ´months ago | Speed Knob - 24-spline Black

Question 36

fret wire View answer

Asked 10 ´months ago | Coiled Fret Wire - 051x100 Nickel/Silver (per pound)

Question 37

How much does this product weigh? View answer

Asked 10 ´months ago | CopperSound DIY - Solder Dispenser

Question 38

I have a 60th Anniversary American Vintage Strat. Will these fit with no modifications? View answer

Asked 10 ´months ago | Gotoh SD91-MG-05M Top-Locking Tuners - 6-inline Nickel

Question 39

Is there a maximum mounting material thickness? View answer

Asked 10 ´months ago | Cliff S4 - 1/4" Mono Switching Jack (4 lug; solder)

Question 40

will the gotoh gb350 tuners fit a Ibanez SR 500 bass and...does a @2+2 set mean a set of 4 tuners is sold as a set View answer

Asked 10 ´months ago | Gotoh GB350-4 - Res-o-lite Bass Tuners - 2+2 Black

Question 41

hi ,can you give me the dimension for the mounting hole . View answer

Asked 10 ´months ago | Mini Switch - Standard DPDT On-On-On

Question 42

Is the one in the featured pic white or parchment. I am trying to match a 60s Fender which looks the same colour View answer

Asked 10 ´months ago | Vintage Style Knob - Choose Colour

Question 43

are mounting screws included? View answer

Asked 10 ´months ago | Pickguard - Stratocaster 11-Hole, Tremolo, SSS (choose colour)

Question 44

is this a direct replacement for a '75 Ovation Electric Legend? View answer

Asked 10 ´months ago | Bone Nut - Slotted for Acoustic

Question 45

Will this fit on an older Pedaltrain PT-2 board? View answer

Asked 10 ´months ago | CIOKS Mini GRIP Bracket

Question 46

Will this fit on an older Pedaltrain PT-2 board? View answer

Asked 10 ´months ago | CIOKS GRIP Bracket v2

Question 47

what size hole is required to fit this can cap on top of an amp chassis? View answer

Asked 10 ´months ago | F&T Capacitor - Electrolytic, Multi-Section, Can, 32/32µF 500V

Question 48

How far apart are the holes? View answer

Asked 10 ´months ago | Handle Mount Spike - For Slotted Strap Handles

Question 49

is these have the same mesurement as "TE-INUNCY-STEREO" exept for body ground? View answer

Asked 11 ´months ago | Cliff S2 - 1/4" Stereo Switching Jack (6 lug; Straight PCB)

Question 50

I believe the bottom edge on this part is chamfered, rather than cambered. Peace. View answer

Asked 11 ´months ago | Humbucker Slug - Nickel (chamfered) CLEARANCE

Tools